Albany Roof Repair, Replacement & Installation
Roof repairs, full replacements, storm damage, gutters, metal roofing, flat roofs. Best Roofers Near Me | Albany covers it all in Albany. Licensed, insured, manufacturer-certified.
Roof Replacement
Your roof replacement includes a full-system install: ice and water shield at eaves, valleys, and penetrations; synthetic underlayment across the entire deck; aluminum drip edge at rake and eave; starter strip with sealant; architectural shingles with 130+ mph wind rating; and continuous ridge vent for proper attic ventilation. We also install new pipe boots and vent flashing on every penetration.
Get a Free Quote →
Roof Repair
Our roof repair process: inspect the issue, identify the root cause, quote the fix, do the work, warranty the repair. Simple. If the root cause is widespread (poor ventilation causes ice dams, for example), we'll recommend addressing that too. But the choice is always yours.
Get a Free Quote →
Storm Damage Repair
After a major storm in Albany, we mobilize quickly. Emergency tarping within 24 hours to prevent secondary water damage. Then a full damage inspection once conditions allow. We use drone photography on larger commercial roofs to document everything the adjuster needs.
Get a Free Quote →
New Roof Installation
New construction roofing in Albany starts with getting the design details right before materials arrive. Roof pitch, attic ventilation needs, snow load requirements, and local code amendments all affect material selection and installation methods. We coordinate with your general contractor or architect to ensure the roof system matches the building specifications.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our Albany crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
Asphalt shingles cover more homes in America than every other roofing material combined. There's a reason. They're affordable, they look good, they last 25-50 years depending on the grade, and they come in dozens of colors and profiles. Our Albany crews have installed thousands of shingle roofs and we know the product better than most roofers in the state.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in Albany. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →
Commercial Roofing
For commercial kitchens and restaurants in Albany, PVC membrane is the only option that resists animal fat and chemical exposure from rooftop grease exhaust. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom accessories. Modified bitumen with SBS or APP polymer-modified asphalt for high-traffic commercial roofs. Two-ply systems with 20-year NDL (No Dollar Limit) warranties from Johns Manville or Firestone.
Get a Free Quote →
Gutter Installation
Gutter replacement in Albany costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →
Roof Inspection
Annual inspections catch small problems early. A cracked pipe boot is a $150 repair. A year of water leaking through that crack causes $3,000+ in ceiling, insulation, and drywall damage. We recommend an inspection every 2-3 years for newer roofs, annually for roofs over 15 years.
Get a Free Quote →
Emergency Roof Repair
We don't charge extra for emergency tarp jobs. The tarping cost is rolled into the permanent repair price. If you need us at midnight during a storm, the price is the same as a Tuesday afternoon.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →